Dispatch

This is Local 213’s work information for Thursday, Sept. 24th, 2026.

The 1st call is for CAM at Irving Oil Refinery; they require

*4 Journeyman Pipefitters 

Starting Monday, Sept. 28th, at 7:30am. Day Shift. Will be working 6x10s plus. The duration is unknown. This work is under the GPMA Agreement under short-term conditions. Must be clean-shaven and fit-tested and must have all safety training up-to-date. Orientation will be done onsite. A D&A test is required.

The 2nd call is for CAM at Irving Oil Refinery; they require

*1 F3/F4 welder to test on F3/F4; F6/F5

Starting ASAP, at 7:30am. Will be working 4x10s plus. The duration is unknown. This work is for outages under Maintenance and Repair GPMA under short-term conditions but will qualify for shutdown incentives. Must be clean-shaven and fit-tested and must have all safety training up-to-date and must complete all CAM orientation before arrival. IOR orientation will be done onsite. A D&A test is required.

Any local members interested in these calls, please contact the hall Friday morning between 8:00 and 10:00 AM.

Thank you; have a great evening!

This is Local 213’s work information for Wednesday, Sept. 23rd, 2026.

The 1st call is for CAM at Irving Oil Refinery; they require

*4 Journeyman Pipefitters and 1 Apprentice Pipefitter 

Starting Monday, Sept. 28th, at 7:30am. Will be working 6x10s plus. The duration is unknown. This work is under the GPMA Agreement under short-term conditions. Must be clean-shaven and fit-tested and must have all safety training up-to-date. Orientation will be done onsite. A D&A test is required.

The 2nd call is for CAM at Irving Oil Refinery; they require

*1 Journeyman Pipefitter

Starting Monday, Sept. 28th, at 7:30pm. Night Shift. Will be working 4x10s plus. The duration is unknown. This work is under the Industrial Agreement. Must be clean-shaven and fit-tested and must have all safety training up-to-date. Must complete all orientation and hire-on paperwork before reporting to the site. 

The 3rd call is for CAM at Irving Oil Refinery; they require

*1 F3/F4 welder to test on F3/F4; F6/F5

Starting ASAP, at 7:30am. Will be working 4x10s plus. The duration is unknown. This work is for outages under Maintenance and Repair GPMA under short-term conditions but will qualify for shutdown incentives. Must be clean-shaven and fit-tested and must have all safety training up-to-date and must complete all CAM orientation before arrival. IOR orientation will be done onsite. A D&A test is required.

The 4th call is for CAM at Irving Oil Refinery; they require

*1 Journeyman Instrument Tech for Days and* 2 Apprentice Instrument Techs, 1 for Days and 1 for Nights. 

Starting ASAP, at 7:30am/7:30pm. Will be working 4x10s. The duration is unknown. This work is under Maintenance and Repair GPMA under short-term conditions. Must be clean-shaven and fit-tested and must have all safety training up-to-date and must complete all CAM orientation before arrival. IOR orientation will be done onsite. A D&A test is required.

Any local members interested in these calls, please contact the hall Thursday morning between 8:00 and 10:00 AM.

Thank you; have a great evening!

This is Local 213’s work information for Tuesday, Sept. 22nd, 2026.

The 1st call is for CAM at Irving Oil Refinery; they require

*1 F3/F4 welder to test on F3/F4; F6/F5

Starting ASAP, at 7:30am. Will be working 4x10s plus. The duration is unknown. This work is for outages under Maintenance and Repair GPMA under short-term conditions but will qualify for shutdown incentives. Must be clean-shaven and fit-tested and must have all safety training up-to-date and must complete all CAM orientation before arrival. IOR orientation will be done onsite. A D&A test is required.

The 2nd call is for CAM at Irving Oil Refinery; they require

*1 Journeyman Instrument Tech, 1 for Days, and* 2 Apprentice Instrument Techs, 1 for Days and 1 for Nights. 

Starting Sunday, ASAP, at 7:30am/7:30pm. Will be working 4x10s. The duration is unknown. This work is under Maintenance and Repair GPMA under short-term conditions. Must be clean-shaven and fit-tested and must have all safety training up-to-date and must complete all CAM orientation before arrival. IOR orientation will be done onsite. A D&A test is required.

Any local members interested in these calls, please contact the hall Wednesday morning between 8:00 and 10:00 AM.

Thank you; have a great evening!

This is Local 213’s work information for Monday, Sept. 21st, 2026.

There will be a retiree luncheon held on October 2nd at the Legion Branch 69, located at 714 Wilson Street. The doors open at 11:00am, and the buffet starts at 12:30pm and ends at 2:30pm. The menu is buffet style and includes: Ham & beef, mashed potatoes, gravy, peas, and carrots. Assorted pies for dessert. Any retirees interested, please contact the hall no later than September 22nd.

The 1st call is for Stuart Olson at Irving Oil Refinery; they require

* 1 F3/F4 welder to test on F3/F4; F6/F5 for Days

Starting ASAP, at 7:30 am. Will be working 6×10’s. The duration is 2 weeks plus. This work is under the GPMA Agreement under short-term conditions. Must be clean-shaven and fit-tested and must have all safety training up-to-date and must complete all Stuart Olson orientation before arrival. IOR orientation will be done onsite. A D&A test is required.

The 2nd call is for CAM at Irving Oil Refinery; they require

*1 F3/F4 welder to test on F3/F4; F6/F5

Starting ASAP, at 7:30am. Will be working 4x10s plus. The duration is unknown. This work is for outages under Maintenance and Repair GPMA under short-term conditions but will qualify for shutdown incentives. Must be clean-shaven and fit-tested and must have all safety training up-to-date and must complete all CAM orientation before arrival. IOR orientation will be done onsite. A D&A test is required.

The 3rd call is for CAM at Irving Oil Refinery; they require

*1 Journeyman Instrument Tech, 1 for Days, and* 2 Apprentice Instrument Techs, 1 for Days and 1 for Nights. 

Starting Sunday, ASAP, at 7:30am/7:30pm. Will be working 4x10s. The duration is unknown. This work is under Maintenance and Repair GPMA under short-term conditions. Must be clean-shaven and fit-tested and must have all safety training up-to-date and must complete all CAM orientation before arrival. IOR orientation will be done onsite. A D&A test is required.

The 4th call is for Lorneville at Irving Pulp and Paper; they require

* 1 F3/F4 Welder to test on F3/F4; F6/F4

Starting ASAP at 6:00 pm. This is a night-shift call. Will be working 4x10s. Duration is 3 weeks plus. This work is under the Industrial Agreement. Must be clean-shaven and fit-tested and must have all safety training up-to-date and must complete all orientation and hire-on paperwork before arrival. 

Any local members interested in these calls, please contact the hall Tuesday morning between 8:00 and 10:00 AM.

Thank you; have a great evening!

This is Local 213’s work information for Friday, Sept. 18th, 2026.

There will be a retiree luncheon held on October 2nd at the Legion Branch 69, located at 714 Wilson Street. The doors open at 11:00am, and the buffet starts at 12:30pm and ends at 2:30pm. The menu is buffet style and includes: Ham & beef, mashed potatoes, gravy, peas, and carrots. Assorted pies for dessert. Any retirees interested, please contact the hall no later than September 22nd.

The 1st call is for Stuart Olson at Irving Oil Refinery; they require

* 2 F3/F4 Welder to test on F3/F4; F6/F5  for Days

Starting Monday, Sept. 21st, at 7:30 am. Will be working 6×10’s. The duration is 2 weeks plus. This work is under the GPMA Agreement under short-term conditions. Must be clean-shaven and fit-tested and must have all safety training up-to-date and must complete all Stuart Olson orientation before arrival. IOR orientation will be done onsite. A D&A test is required.

The 2nd call is for CAM at Irving Oil Refinery; they require

*1 F3/F4 welder to test on F3/F4; F6/F5

Starting Monday, September 21st, at 7:30am. Will be working 4x10s plus. The duration is unknown. This work is for outages under Maintenance and Repair GPMA under short-term conditions but will qualify for shutdown incentives. Must be clean-shaven and fit-tested and must have all safety training up-to-date and must complete all CAM orientation before arrival. IOR orientation will be done onsite. A D&A test is required.

The 3rd call is for CAM at Irving Oil Refinery; they require

*1 Journeyman Instrument Tech, 1 for Days, and* 2 Apprentice Instrument Techs, 1 for Days and 1 for Nights. 

Starting Sunday, September 13th, at 7:30am/7:30pm. Will be working 4x10s. The duration is unknown. This work is under Maintenance and Repair GPMA under short-term conditions. Must be clean-shaven and fit-tested and must have all safety training up-to-date and must complete all CAM orientation before arrival. IOR orientation will be done onsite. A D&A test is required.

The 4th call is for Lorneville at Irving Pulp and Paper; they require

* 1 F3/F4 Welder to test on F3/F4; F6/F4

Starting Monday, ASAP, at 6:00 pm. This is a night-shift call. Will be working 4x10s. Duration is 3 weeks plus. This work is under the Industrial Agreement. Must be clean-shaven and fit-tested and must have all safety training up-to-date and must complete all orientation and hire-on paperwork before arrival. 

Any local members interested in these calls, please contact the hall Monday morning between 8:00 and 10:00 AM.

Thank you; have a great weekend!

This is Local 213’s work information for Thursday, Sept. 17th, 2026.

There will be a retiree luncheon held on October 2nd at the Legion Branch 69, located at 714 Wilson Street. The doors open at 11:00am, and the buffet starts at 12:30pm and ends at 2:30pm. The menu is buffet style and includes: Ham & beef, mashed potatoes, gravy, peas, and carrots. Assorted pies for dessert. Any retirees interested, please contact the hall no later than September 22nd.

The 1st call is for Stuart Olson at Irving Oil Refinery; they require

* 2 F3/F4 welder to test on F3/F4; F6/F5  for Days

Starting Monday, Sept. 21st, at 7:30 am. Will be working 6×10’s. The duration is 2 weeks plus. This work is under the GPMA Agreement under short-term conditions. Must be clean-shaven and fit-tested and must have all safety training up-to-date and must complete all Stuart Olson orientation before arrival. IOR orientation will be done onsite. A D&A test is required.

The 2nd call is for CAM at Irving Oil Refinery; they require

*1 F3/F4 welder to test on F3/F4; F6/F5

Starting Monday, September 21st, at 7:30am. Will be working 4x10s plus. The duration is unknown. This work is for outages under Maintenance and Repair GPMA under short-term conditions but will qualify for shutdown incentives. Must be clean-shaven and fit-tested and must have all safety training up-to-date and must complete all CAM orientation before arrival. IOR orientation will be done onsite. A D&A test is required.

The 3rd call is for CAM at Irving Oil Refinery; they require

*1 Journeyman Instrument Tech, 1 for Days, and* 2 Apprentice Instrument Techs, 1 for Days and 1 for Nights. 

Starting Sunday, September 13th, at 7:30am/7:30pm. Will be working 4x10s. The duration is unknown. This work is under Maintenance and Repair GPMA under short-term conditions. Must be clean-shaven and fit-tested and must have all safety training up-to-date and must complete all CAM orientation before arrival. IOR orientation will be done onsite. A D&A test is required.

The 4th call is for Lorneville at Irving Pulp and Paper; they require

 * 1 F3/F4 Welder to test on F3/F4; F6/F4

Starting Monday, Sept. 14th, at 6:00 pm. This is a night-shift call. Will be working 4x10s. Duration is 3 weeks plus. This work is under the Industrial Agreement. Must be clean-shaven and fit-tested and must have all safety training up-to-date and must complete all orientation and hire-on paperwork before arrival. 

Any local members interested in these calls, please contact the hall Friday morning between 8:00 and 10:00 AM.

Thank you; have a great evening!