This is Local 213’s work information for Friday, May 30th, 2025.
It is with great sadness we announce the passing of Donald McGrath on Monday, May 27th. Visitation will take place at Saint-Antonie L’Ermite Church on Friday, May 30th, 2025, from 2-4pm and 6-8pm, followed by the funeral on Saturday, May 31st, 2025, at 10:00am.
The hall will be holding a grinding course for apprentices. If you are interested in attending, please contact the hall to get registered.
We are looking to see if there is any interest among retirees in attending a golf tournament at the Midland Golf Course in mid-August. The cost would be $60.00 per person, which would cover nine rounds of golf with a cart, two beverages, and BBQ. Please contact the hall by Monday, June 2nd, so we can determine if there is enough interest.
Local 213’s annual summer picnic will be held on Saturday, July 12th, from 12:00pm to 4:00pm at the Glen Carpenter Center, 730 Foster Thurston Drive. Please contact the hall to get registered before June 30th. We are also looking for volunteers. If you are available to lend a hand, please advise the hall when registering.
The Compassionate Grief Center will be holding their annual Jason Zelward Physical Challenge on June 21st from 1-4 pm. If you are interested in a fun afternoon of Washer Toss and Tug of War. Please contact the hall to register.
1st call is for Sunny Corner at Point Lepreau; they require:
* 3 Journeyman Instrument Techs 2 for days, 1 for nights
Starting Monday, June 16th Day shift 7:30am – 5:00pm, night shift 9:30pm – 7:30am. Duration is approximately 5-6 months. You will be working 50 hours per week, Monday-Friday, with the possibility of working 12-hour shifts and weekend days/nights for critical path work. The shift schedule will be 5x10s during the outage. Additional overtime may be required. Hours of work during the outage will be as per NBPN’s hours of work policy. There may be a requirement to reduce the shift to 8 hours during the outage if there is downtime. Start, quit, and break times may be adjusted based on customer requirements. The crews will be split into day shift and night shift. Could be work in the reactor building. This work is under the NMA agreement. Must be clean-shaven and fit-tested. Must be able to climb and work from heights. Must have all safety training up to date. CSIS clearance is required.
2nd call is for Cam at the Irving Oil Refinery; they require:
* 1 Journeyman Instrument Tech
Starting ASAP, at 7:30am. Duration is unknown. You will be working 4x10s, 40 hours plus. This work is under the GPMA Agreement under short-term conditions as per the site memo. Must be clean-shaven and fit-tested. Must be able to climb and work from heights. Must have all safety training up to date. Must complete online orientation before reporting to the site. A D&A test is required.
Any local members interested in these calls, please contact the hall Monday morning between 8 and 10 am.
Thank you, and have a Great Weekend!
