Wednesday, August 20th, 2025. 

This is Local 213’s work information for Wednesday, August 20th, 2025. 

Any members who require CWB testing, please contact the hall to reserve a booth. The date is TBD.

Just a reminder, the Golf Tournament will be held tomorrow, Aug. 21st, at 2pm.

1 call for Lorneville at the Irving Oil Refinery: They require

* 3 F3/F4 Welders to test on F3/F4.

Starting ASAP, at 7:00am. Duration is 2 weeks plus. Will be working 4×10’s with possible overtime. Job Scope: Refinery Projects -This is NOT a shutdown call. This work is under the NMA agreement under short-term conditions. Must be clean-shaven and fit-tested. Must be able to climb and work from heights. Must have all safety training up to date. A D&A test is required.

2nd call for Lorneville at the LNG: They require

*3 Journeyman Pipefitters *1 F3/F4 Welder to test on Stainless Steel TIG all the way and mud rod *1 Apprentice Pipefitter.

Starting Monday, Aug. 25th, at 7:00am. Duration is 2 weeks plus. Will be working 4×10’s Mon-Thurs with possible overtime. This work is under the Industrial Agreement. Must be clean-shaven and fit-tested. Must be able to climb and work from heights. There will be lots of walking and stairs as well as heavy lifting and rigging. Must have all safety training up to date. 

3rd call for CAM at the Irving Pulp and Paper Mill: They require

*1 F3/F4 Welder to test Stainless Tig

Starting Monday, August 25th, at 7:30am. Duration is unknown. Will be working 4×10’s, 40 hours plus possible overtime.This work is under the Industrial Agreement. Must be clean-shaven and fit-tested. Must be able to climb and work from heights. Must have all safety training up to date. 

4th call for CAM at the Irving Oil Refinery: They require

*2 Journeyman Pipefitters for Days

Starting Monday, August 25th, at 6:00pm. Duration is unknown. Will be working 40 hours with possible overtime. This request is for a 2-break shift.This is a TURNAROUND call. This work is under the GPMA short-term agreement. Must be clean-shaven and fit-tested. Must be able to climb and work from heights. Must have all safety training up to date. A D&A test is required.

5th call is for Sunny Corner at Point Lepreau: They require: 

*1 F3/F4 Welders to test on F4; F5; F6/F4; F6/F5; and F6 with 3/8 Tubes (As per NBPN’s weld procedures) 

Starting Monday, August 25th, at the hall for practice at 7:30am. Duration is 4-6 weeks. Base shift is 4-10’s. Practice and welder testing at the hall will be 5x 10s with no work on Sept. 1st. Will be going to Lepreau Site on Sept. 8th or 9th. This date is dependent on testing. Shifts will be 5-10 Monday to Friday 7am-5pm with 2 one-half-hour breaks.Additional overtime may be required. Mandatory days off will not be paid. There may be a requirement to reduce the shift to 4-10s during training, testing, orientation, and downtime. Start, quit, and break times may be adjusted based on customer requirements. Will be working under the PLGS NMA Must be clean-shaven and fit-tested. Must be able to climb and work from heights. Must have all safety training up to date. 

6th call for Lorneville at the Irving Oil Refinery:They require

* 2 Journeyman Pipefitters * 1 Apprentice Pipefitter 

Starting Tues., Sept. 2nd, at 7:00am. This is a DAYSHIFT call. Duration is 2 weeks plus. Will be working 6×10’s with possible overtime. Job Scope: TURNAROUND.This work is under the NMA agreement under short-term conditions. Must be clean-shaven and fit-tested. Must be able to climb and work from heights. Must have all safety training up to date. A D&A test is required.

7th call for Lorneville at the Irving Oil Refinery:They require

* 3 F3/F4 Welders to test on F3/F4; F6/F5. 

Starting Tues., Sept. 2nd, at 7:00am. This is a NIGHT SHIFT call. Duration is 2 weeks plus. Will be working 6×10’s with possible overtime. Job Scope: TURNAROUND.This work is under the NMA agreement under short-term conditions. Must be clean-shaven and fit-tested. Must be able to climb and work from heights. Must have all safety training up to date. A D&A test is required

Any local members interested in these calls, please contact the hall Thursday morning between 8 and 10am.