This is Local 213’s work information for Thursday, Sept. 10th, 2026.

There will be a retiree luncheon held on October 2nd at the Legion Branch 69, located at 714 Wilson Street. The doors open at 11:00am, and the buffet starts at 12:30pm and ends at 2:30pm. The menu is buffet style and includes: Ham & beef, mashed potatoes, gravy, peas, and carrots. Assorted pies for dessert. Any retirees interested, please contact the hall no later than September 22nd.

There will be a confined space held at the hall on Fri the 11th and Sat the 12th. If you require this course, please contact the JATC to get booked at 506-622-0219.

The 1st call is for Sunny Corner at Bayside Power; they require

*1 F3/F4 welder to test on carbon and chrome

Starting Monday, Sept. 14th, at 7:30 am. This is a day-shift call. Will be working 4x10s pre-outage. 6×10’s during the outage. The duration is approx. 2 weeks. This work is under the NMA Agreement. Must be clean-shaven and fit-tested and must have all safety training up-to-date and must complete all orientation and hire-on paperwork before arrival. 

The 2nd call is for Stuart Olson at Irving Oil Refinery; they require

* 1 F3/F4 welder to test on F3/F4; F6/F5 for nights 

Starting Monday, Sept. 21st, at 7:30 pm. Will be working 6×10’s. The duration is 2 weeks plus. This work is under the NMA Agreement under short-term conditions. Must be clean-shaven and fit-tested and must have all safety training up-to-date and must complete all Stuart Olson orientation before arrival. IOR orientation will be done onsite. A D&A test is required.

The 3rd call is for CAM at Irving Oil Refinery; they require

 *1 Apprentice Pipefitter *2 F3/F4 Welders to test on 

Starting Monday, September 21st, at 7:30am. Will be working 4x10s. The duration is unknown. This work is for outages under Maintenance and Repair GPMA under short-term conditions. Must be clean-shaven and fit-tested and must have all safety training up-to-date and must complete all CAM orientation before arrival. IOR orientation will be done onsite. A D&A test is required.

The 4th call is for CAM at Irving Pulp and Paper Mill; they require

*2 Journeyman Pipefitters

Starting Monday, September 14th, at 7:30am. Will be working 4x10s. The duration is unknown. This work is under Industrial agreement. Must be clean-shaven and fit-tested and must have all safety training up-to-date and must complete all orientation and hire-on paperwork before reporting to the site. 

The 5th call is for CAM at Irving Oil Refinery; they require

*2 Journeyman Instrument Techs, 1 for Days and 1 for Nights, and* 2 Apprentice Instrument Techs I for Days and 1 for Nights. 

Starting Sunday, September 13th, at 7:30am/7:30pm. Will be working 4x10s. The duration is unknown. This work is under Maintenance and Repair GPMA under short-term conditions. Must be clean-shaven and fit-tested and must have all safety training up-to-date and must complete all CAM orientation before arrival. IOR orientation will be done onsite. A D&A test is required.

The 6th call is for Lorneville at Irving Pulp and Paper; they require

* 1 Journeyman Pipefitter * 1 F3/F4 Welder to test on F3/F4 ;F6/F4

Starting Monday, Sept. 14th, at 6:00 pm. This is a night-shift call. Will be working 4x10s. Duration is 3 weeks plus. This work is under the Industrial Agreement. Must be clean-shaven and fit-tested and must have all safety training up-to-date and must complete all orientation and hire-on paperwork before arrival. 

Any local members interested in these calls, please contact the hall Friday morning between 8:00 and 10:00 AM.

Thank you; have a great evening!