Dispatch

This is Local 213’s work information for Wednesday, August 20th, 2025. 

Any members who require CWB testing, please contact the hall to reserve a booth. The date is TBD.

Just a reminder, the Golf Tournament will be held tomorrow, Aug. 21st, at 2pm.

1 call for Lorneville at the Irving Oil Refinery: They require

* 3 F3/F4 Welders to test on F3/F4.

Starting ASAP, at 7:00am. Duration is 2 weeks plus. Will be working 4×10’s with possible overtime. Job Scope: Refinery Projects -This is NOT a shutdown call. This work is under the NMA agreement under short-term conditions. Must be clean-shaven and fit-tested. Must be able to climb and work from heights. Must have all safety training up to date. A D&A test is required.

2nd call for Lorneville at the LNG: They require

*3 Journeyman Pipefitters *1 F3/F4 Welder to test on Stainless Steel TIG all the way and mud rod *1 Apprentice Pipefitter.

Starting Monday, Aug. 25th, at 7:00am. Duration is 2 weeks plus. Will be working 4×10’s Mon-Thurs with possible overtime. This work is under the Industrial Agreement. Must be clean-shaven and fit-tested. Must be able to climb and work from heights. There will be lots of walking and stairs as well as heavy lifting and rigging. Must have all safety training up to date. 

3rd call for CAM at the Irving Pulp and Paper Mill: They require

*1 F3/F4 Welder to test Stainless Tig

Starting Monday, August 25th, at 7:30am. Duration is unknown. Will be working 4×10’s, 40 hours plus possible overtime.This work is under the Industrial Agreement. Must be clean-shaven and fit-tested. Must be able to climb and work from heights. Must have all safety training up to date. 

4th call for CAM at the Irving Oil Refinery: They require

*2 Journeyman Pipefitters for Days

Starting Monday, August 25th, at 6:00pm. Duration is unknown. Will be working 40 hours with possible overtime. This request is for a 2-break shift.This is a TURNAROUND call. This work is under the GPMA short-term agreement. Must be clean-shaven and fit-tested. Must be able to climb and work from heights. Must have all safety training up to date. A D&A test is required.

5th call is for Sunny Corner at Point Lepreau: They require: 

*1 F3/F4 Welders to test on F4; F5; F6/F4; F6/F5; and F6 with 3/8 Tubes (As per NBPN’s weld procedures) 

Starting Monday, August 25th, at the hall for practice at 7:30am. Duration is 4-6 weeks. Base shift is 4-10’s. Practice and welder testing at the hall will be 5x 10s with no work on Sept. 1st. Will be going to Lepreau Site on Sept. 8th or 9th. This date is dependent on testing. Shifts will be 5-10 Monday to Friday 7am-5pm with 2 one-half-hour breaks.Additional overtime may be required. Mandatory days off will not be paid. There may be a requirement to reduce the shift to 4-10s during training, testing, orientation, and downtime. Start, quit, and break times may be adjusted based on customer requirements. Will be working under the PLGS NMA Must be clean-shaven and fit-tested. Must be able to climb and work from heights. Must have all safety training up to date. 

6th call for Lorneville at the Irving Oil Refinery:They require

* 2 Journeyman Pipefitters * 1 Apprentice Pipefitter 

Starting Tues., Sept. 2nd, at 7:00am. This is a DAYSHIFT call. Duration is 2 weeks plus. Will be working 6×10’s with possible overtime. Job Scope: TURNAROUND.This work is under the NMA agreement under short-term conditions. Must be clean-shaven and fit-tested. Must be able to climb and work from heights. Must have all safety training up to date. A D&A test is required.

7th call for Lorneville at the Irving Oil Refinery:They require

* 3 F3/F4 Welders to test on F3/F4; F6/F5. 

Starting Tues., Sept. 2nd, at 7:00am. This is a NIGHT SHIFT call. Duration is 2 weeks plus. Will be working 6×10’s with possible overtime. Job Scope: TURNAROUND.This work is under the NMA agreement under short-term conditions. Must be clean-shaven and fit-tested. Must be able to climb and work from heights. Must have all safety training up to date. A D&A test is required

Any local members interested in these calls, please contact the hall Thursday morning between 8 and 10am.

This is Local 213’s work information for Tuesday, August 19th, 2025. 

Any members who require CWB testing, please contact the hall to reserve a booth. The date is TBD.

1 call for Lorneville at the Irving Oil Refinery:They require

* 3 F3/F4 Welders to test on F3/F4.

Starting ASAP, at 7:00am. Duration is 2 weeks plus. Will be working 4×10’s with possible overtime. Job Scope: Refinery Projects -This is NOT a shutdown call. This work is under the NMA agreement under short-term conditions. Must be clean-shaven and fit-tested. Must be able to climb and work from heights. Must have all safety training up to date. A D&A test is required.

2nd call for Lorneville at the LNG: They require

*3 Journeyman Pipefitters *2 F3/F4 Welders to test on Stainless Steel TIG all the Way and Mud Rod 

Starting Monday, Aug. 25th, at 7:00am. Duration is 2 weeks plus. Will be working 4×10’s Mon-Thurs. This work is under the Industrial Agreement. Must be clean-shaven and fit-tested. Must be able to climb and work from heights. There will be lots of walking and stairs as well as heavy lifting and rigging. Must have all safety training up to date. 

3rd call for CAM at the Irving Oil Refinery:They require

*2 Journeyman Pipefitters for Nights 

Starting Monday, August 25th, at 6:00pm. Duration is unknown. Will be working 4×10’s with possible overtime. This request is for a 2-break shift. This work is maintenance and repair under the GPMA short term. Will be on maintenance for two weeks, then moving to turnaround on September 8th. Must be clean-shaven and fit-tested. Must be able to climb and work from heights. Must have all safety training up to date. A D&A test is required.

4th call for CAM at the Irving Oil Refinery:They require

*2 Journeyman Pipefitters for Days

Starting Monday, August 25th, at 6:00pm. Duration is unknown. Will be working 40 hours with possible overtime. This request is for a 2-break shift.This is a TURNAROUND call. Will be working under the GPMA short-term agreement. Must be clean-shaven and fit-tested. Must be able to climb and work from heights. Must have all safety training up to date. A D&A test is required.

5th call is for Sunny Corner at Point Lepreau

*2 F3/F4 Welders to test on F4; F5; F6/F4; F6/F5; and F6 with 3/8 Tubes (As per NBPN’s weld procedures) 

Starting Monday, August 25th, at the hall for practice at 7:30am. Duration is 4-6 weeks. Base shift is 4-10’s. Practice and welder testing at the hall will be 5x 10s with no work on Sept. 1st. Will be going to Lepreau Site on Sept. 8th or 9th. This date is dependent on testing. Shifts will be 5-10 Monday to Friday 7am-5pm with 2 one-half-hour breaks.Additional overtime may be required. Mandatory days off will not be paid. There may be a requirement to reduce the shift to 4-10s during training, testing, orientation, and downtime. Start, quit, and break times may be adjusted based on customer requirements. Will be working under the GPMA short-term agreement. Must be clean-shaven and fit-tested. Must be able to climb and work from heights. Must have all safety training up to date. A D&A test is required.

Any local members interested in these calls, please contact the hall Wednesday morning between 8 and 10am.

This is Local 213’s work information for Monday, August 18th, 2025. 

Any members who require CWB testing, please contact the hall to reserve a booth. The date is TBD.

1 call for Lorneville at the Irving Oil Refinery: They require

* 2 F3/F4 Welders to test on F3/F4.

Starting ASAP, at 7:00am. Duration is 2 weeks plus. Will be working 4×10’s with possible overtime. Job Scope: Refinery Projects. This work is under the NMA agreement under short-term conditions. Must be clean-shaven and fit-tested. Must be able to climb and work from heights. Must have all safety training up to date. A D&A test is required.

2nd call for Stuart Olson at the Irving Oil Refinery: They  require

* 12 Journeyman Pipefitters for Days  * 9 Journeyman Pipefitters for Nights * 3 Apprentice Pipefitters for Days * 2 Apprentice Pipefitters for Nights * 1 F3/F4 Welder to test on F3/F4 & F6/F5 for Days. 

Starting Monday, Sept. 15th, 7:30am for Day shift and 7:30pm for Night shift. Duration is 2 weeks plus. Will be working 4×10’s with possible overtime for preshut and 6×10’s for turnaround. This work is under the GPMA agreement under short-term conditions. Must be clean-shaven and fit-tested. Must be able to climb and work from heights. Must have all safety training up to date. A D&A test is required.

3rd call for CAM at the Irving Oil Refinery:  They require

*2 Journeyman Pipefitters for Nights

Starting Monday, August 25th at 6:00pm.  Duration is unknown.  Will be working 4×10’s with possible overtime.  This work is maintenance and repair under the GPMA short term.  Will be in maintenance for two weeks then moving to Turnaround on September 8th.  Must be clean shaven and fit tested.  Must be able to climb and work from heights.  Must have all safety training up to date.  A D&A test is required.

Any local members interested in these calls, please contact the hall Tuesday morning between 8 and 10am.

This is Local 213’s work information for Friday, August 15th, 2025. 

Any members who require CWB testing, please contact the hall to reserve a booth. The date is TBD.

1 call for Lorneville at the Irving Oil Refinery: They require

* 2 F3/F4 Welders to test on F3/F4.

Starting ASAP, at 7:00am. Duration is 2 weeks plus. Will be working 4×10’s with possible overtime. Job Scope: Refinery Projects. This work is under the NMA agreement under short-term conditions. Must be clean-shaven and fit-tested. Must be able to climb and work from heights. Must have all safety training up to date. A D&A test is required.

2nd call for Stuart Olson at the Irving Oil Refinery:They  require

* 1 Journeyman Pipefitters for Nights  * 3 Apprentice Pipefitters for Days * 2 Apprentice Pipefitters for Nights * 1 F3/F4 Welders to test on F3/F4 & F6/F5 for Nights. 

Starting Thursday, Sept. 11th, 7:30am for Day shift and 7:30pm for Night shift. Duration is 2 weeks plus. Will be working 4×10’s with possible overtime for preshut and 6×10’s for turnaround. This work is under the GPMA agreement under short-term conditions. Must be clean-shaven and fit-tested. Must be able to climb and work from heights. Must have all safety training up to date. A D&A test is required.

Any local members interested in these calls, please contact the hall Monday morning between 8 and 10am.

This is Local 213’s work information for Thursday, August 14th, 2025. 

Any members who require CWB testing, please contact the hall to reserve a booth. The date is TBD.

1 call for Lorneville at the Irving Oil Refinery:They require

* 1 F3/F4 Welders to test on F3/F4.

Starting Aug. 18th, at 7:00am. Duration is 2 weeks plus. Will be working 4×10’s with possible overtime. This work is under the NMA agreement under short-term conditions. Must be clean-shaven and fit-tested. Must be able to climb and work from heights. Must have all safety training up to date. A D&A test is required.

2nd call for Stuart Olson at the Irving Oil Refinery: They  require

* 6 Journeyman Pipefitters for Days * 9 Journeyman Pipefitters for Nights  * 3 Apprentice Pipefitters for Days * 3 Apprentice Pipefitters for Nights * 2 F3/F4 Welders to test on F3/F4 & F6/F5 for Nights. 

Starting Thursday, Sept. 11th, 7:30am for Day shift and 7:30pm for Night shift. Duration is 2 weeks plus. Will be working 4×10’s with possible overtime for preshut and 6×10’s for turnaround. This work is under the GPMA agreement under short-term conditions. Must be clean-shaven and fit-tested. Must be able to climb and work from heights. Must have all safety training up to date. A D&A test is required.

3rd call for Cam at the Irving Pulp and Paper Mill. They require:

* 1 Journeyman Pipefitter 

Starting Monday, Aug. 18th, at 7:30am. Duration is unknown.Will be working 4×10’s with possible overtime. This work is under the Industrial agreement. Must be clean-shaven and fit-tested. Must be able to climb and work from heights. Must have all safety training up to date.

Any local members interested in these calls, please contact the hall Friday morning between 8 and 10am.

This is Local 213’s work information for Wednesday, August 13th, 2025.

PLEASE BE ADVISED: THE REGULAR MONTHLY MEETING SCHEDULED FOR TONIGHT IS CANCELLED. 

The Golf Tournament scheduled for Thursday, Aug. 14th, will be postponed until Thursday, Aug. 21st, due to the pending weather conditions. 

Any members who require CWB testing, please contact the hall to reserve a booth. The date is TBD.

1 call for Lorneville at the Irving Oil Refinery: They require

* 2 F3/F4 Welders to test on F3/F4 CS * 1 Pipefitter Apprentice

Starting Monday, Aug. 18th, at 7:00am. Duration is 2 weeks plus. Will be working 4×10’s with possible overtime. This work is under the NMA agreement under short-term conditions. Must be clean-shaven and fit-tested. Must be able to climb and work from heights. Must have all safety training up to date. A D&A test is required.

2nd call for Stuart Olson at the Irving Oil Refinery:They  require

*  3 Journeyman Pipefitters for Nights * 2 F3/F4 Welders to test on F3/F4 & F6/F5  for Days * 1 Pipefitter Apprentice for Days 

Starting Monday, Sept. 8th, at 7:30am for Day shift and 7:30pm for Night shift. Duration is 2 weeks plus. Will be working 4×10’s with possible overtime for preshut and 6×10’s for turnaround. The night shift will start on days for orientation and switch to nights. This work is under the GPMA agreement under short-term conditions. Must be clean-shaven and fit-tested. Must be able to climb and work from heights. Must have all safety training up to date. A D&A test is required.

3rd call for Stuart Olson at the Irving Oil Refinery: They  require

* 6 Journeyman Pipefitters for Days * 9 Journeyman Pipefitters for Nights  * 3 Apprentice Pipefitters for Days * 3 Apprentice Pipefitters for Nights * 2 F3/F4 Welders to test on F3/F4 & F6/F5 for Nights. 

Starting Thursday, Sept. 11th, 7:30am for Day shift and 7:30pm for Night shift. Duration is 2 weeks plus. Will be working 4×10’s with possible overtime for preshut and 6×10’s for turnaround. This work is under the GPMA agreement under short-term conditions. Must be clean-shaven and fit-tested. Must be able to climb and work from heights. Must have all safety training up to date. A D&A test is required.

4th call for Lorneville at the LNG: They require

*2 Journeyman Pipefitters * 2 F3/F4 Welders to test on Stainless and Mud Rod * 1 Welding Apprentice 

Starting Monday, Aug. 18th, at 7:00am. Duration is 2 weeks plus. Will be working 4×10’s Mon-Thurs with possible overtime. This work is under the Industrial agreement.  Must be clean-shaven and fit-tested. Will require lots of walking and stairs, heavy lifting, and heavy rigging. Must be able to climb and work from heights. Must have all safety training up to date. 

Any local members interested in these calls, please contact the hall Thursday morning between 8 and 10am.