Dispatch

This is Local 213’s Work Information for Wednesday, July 31st.

The Weld shop is open by appointment only. Please contact Jamie Profit at (506) 333-8542 to make an appointment.

There will be a 1-day bolt-up course being held at the hall. The date is to be determined. Please contact the hall to get registered.

1st call for Lorneville at Irving Oil Refinery (Gate 8, Turn Around Complex 2 ) they require:

* 1 Journeyman Pipefitter *1 F3/F4 Welder to test on F3/F4  for DAYS

* 1 Journeyman Pipefitter *1 F3/F4 Welder to test on F3/F4  for NIGHTS

Starting Monday Aug. 12th at 7:00 am with plan to switch to 7:30 am start during Turn Around. Night shift will start on days and switch to nights mid Sept. Duration is 2 months.  Scope of work is turn around pre-work. They will be working 4×10’s. Mon – Thurs during pre-work up until mid September, then switching to 6×10’s on turn around. This work is under the Short Term NMA.  Must be clean shaven and fit tested.  Must have all safety training up to date and complete all orientation and hire on paperwork before reporting to site. A D&A test is required.

2nd call for Lorneville at Irving Oil Refinery (Gate 8, Turn Around Complex 2 ) they require:

* 6 Journeyman Pipefitters *3 F3/F4 Welders to test on F3/F4  and *2 Pipefitter Apprentices

Starting Monday Aug. 12th at 7:00 am Duration is 1 month plus.  Scope of work is Maintenance. They will be working 4×10’s. Mon – Thurs with possible overtime. This work is under the Short-Term NMA.  Must be clean shaven and fit tested.  Must have all safety training up to date and complete all orientation and hire on paperwork before reporting to site. A D&A test is required.

3rd call for Lorneville at Irving Oil Refinery (Gate 8, Turn Around Complex 2 ) they require:

* 1 Journeyman Pipefitters *1 Pipefitter Apprentice  for DAYS

* 2 Journeyman Pipefitters for NIGHTS

Starting Monday Aug. 19th at 7:00 am with plan to switch to 7:30 am start during Turn Around. Night shift will start on days and switch to nights mid Sept. Duration is 2 months.  Scope of work is turn around pre-work. They will be working 4×10’s. Mon – Thurs during pre-work up until mid September, then switching to 6×10’s on turn around. This work is under the Short Term NMA.  Must be clean shaven and fit tested.  Must have all safety training up to date and complete all orientation and hire on paperwork before reporting to site. A D&A test is required.

Any local members interested in these calls, please contact the hall  Thursday morning between 8-10am.

Thank you & Have a Great Evening!

This is Local 213’s Work Information for Tuesday, July 30th.

The Weld shop is open by appointment only. Please contact Jamie Profit at (506) 333-8542 to make an appointment.

There will be a 1-day bolt-up course being held at the hall. The date is to be determined. Please contact the hall to get registered.

Any members that require updated safety courses before the shut-down, please contact the hall to register. We will be holding Fall Protection course at the hall on Friday, August 9th, starting at 12:30pm; and Confined Space will be held on Aug. 10th and 11th starting at 8:00am.

There are no calls at the hall today.

Thank you & Have a Great Evening!

This is Local 213’s Work Information for Monday, July 29th.

The Weld shop is open by appointment only. Please contact Jamie Profit at (506) 333-8542 to make an appointment.

There will be a 1-day bolt-up course being held at the hall. The date is to be determined. Please contact the hall to get registered.

Any members that require updated safety courses before the shut-down, please contact the hall to register. We will be holding Fall Protection course at the hall on Friday, August 9th, starting at 12:30pm; and Confined Space will be held on Aug. 10th and 11th starting at 8:00am.

There are no calls at the hall today.

Thank You, & Have a Great Evening!

This is Local 213’s Work Information for Friday, July 26th.

The Weld shop is open by appointment only. Please contact Jamie Profit at (506) 333-8542 to make an appointment.

There will be CWB testing at the hall on July 30th, please contact the hall to register.

There will be a 1-day bolt-up course being held at the hall. The date is to be determined. Please contact the hall to get registered.

Any members that require updated safety courses before the shut-down, please contact the hall to register. We will be holding Fall Protection course at the hall on Friday, August 9th, starting at 12:30pm; and Confined Space will be held on Aug. 10th and 11th starting at 8:00am.

Local 213’s annual summer picnic will be held tomorrow Saturday, July 27th, from 12:00 – 4:00 p.m. at the Glen Carpenter Center, 730 Foster Thurston Drive. We are still looking for volunteers; if you are available to lend a hand, please advise the hall.

There are no calls at the hall today.

Thank You, & Have a Great Evening!

This is Local 213’s Work Information for Thursday, July 25th.

The Weld shop is open by appointment only. Please contact Jamie Profit at (506) 333-8542 to make an appointment.

There will be CWB testing at the hall on July 30th, please contact the hall to register.

There will be a 1-day bolt-up course being held at the hall. The date is to be determined. Please contact the hall to get registered.

Any members that require updated safety courses before the shut-down, please contact the hall to register. We will be holding Fall Protection course at the hall on Friday, August 9th, starting at 12:30pm; and Confined Space will be held on Aug. 10th and 11th starting at 8:00am.

Local 213’s annual summer picnic will be held this Saturday, July 27th, from 12:00 – 4:00 p.m. at the Glen Carpenter Center, 730 Foster Thurston Drive. We are still looking for volunteers; if you are available to lend a hand, please advise the hall.

There are no calls at the hall today.

Thank You, & Have a Great Evening!

This is Local 213’s Work Information for Wednesday, July 24th.

The Weld shop is open by appointment only. Please contact Jamie Profit at (506) 333-8542 to make an appointment.

There will be a 1-day bolt-up course being held at the hall. The date is to be determined. Please contact the hall to get registered.

Any members that require updated safety courses before the shut-down, please contact the hall to register. We will be holding Fall Protection course at the hall on Friday, August 10th, starting at 12:30pm; and Confined Space will be held on Aug. 11th and 12th starting at 8:00am.

Local 213’s annual summer picnic will be held this Saturday, July 27th, from 12:00 – 4:00 p.m. at the Glen Carpenter Center, 730 Foster Thurston Drive. We are still looking for volunteers; if you are available to lend a hand, please advise the hall.

There are no calls at the hall today.

Thank You, & Have a Great Evening!